Saturday, November 8, 2008

Magnets & Magnet Boards

Magnets and Magnet Boards are fun and easy crafts for all craft levels. They are great gifts too!

Here are some Ideas:
This Idea was sent in by Sam this is a great project to run with! These will cost you $.25 each at the most.

Click Here to download instructions


Sam gives the great idea of useing your favorite scrapbook paper, pictures of your kids, or cut outs from magazines. Allison told me that they made these and printed out quotes for the large magnets. They even did the "BE" attitudes:
Be Grateful.
Be Smart. Be Involved. Be Clean. Be True. Be Positive. Be Humble. Be Still. Be Prayerful.

Great Ideas!
The marbles are about 1" in diameter and can be found at Target, JoAnn's and I saw some at the Dollar Store. I just got some from Hobby Lobby (for those of you without a Hobby Lobby, I am sorry-They just moved into AZ so I lived without one for 14 years too long!) the marbles were $2.77 for 60! Great deal! Use a coupon and save more!
**added note: when using home printed pictures you need to be very careful. The heavy duty glue I used (E-6000) melted the pics. I recommend Mod Podging (a staple in every crafters home) the pic on the marble and then use the heavy glue for the magnet. Even with mod podge for printing out pics on a home photo printer it may not work. Good luck!

These cute wooden magnets that Deana sent in--VERY EASY!

You can just buy your favorite wooden cut out shapes at your local craft store. Glue on some scrapbook paper of your choice. Distress it a little with some distress ink and then you can seal it with some Modge Podge. Add embellishments to your liking and then finish it off by gluing on a strong magnet.




Check out these ideas: These were made from the pre cut galvanized sheet metal from Home Depot and Lowes.


Here are some great ideas for magnet boards. This is something very easy that you can personalize and make it your own.




Galvanized sheet metal is not easy to cut so ideally you want to find the perfect size precut for your project. The frame above is the large piece (3' x 4') that you can get at home depot. They then built the frame out of 1 x 2 mitered and stapled together. And then glued the metal on with liquid nails.


This is a small piece of metal that you can also find at Home Depot for under a $1. It measures 8" x 12".
You can paint with Chalk Board Paint to make it a chalk board and magnet board.
At Lowes I found tint-able chalkboard paint if you want something other than black.
Chalk board paint goes a long way so this is a fun group project.
I also found a 5 pack of 5 x 7 pieces of metal for under $3. They are great for small projects. Let your imagination run with that one! Then share with us what you create!
At Lowes at the end of the hardware isle you can find mulitple sizes and gauge of sheet metal to suit your individual project.



If you don't like the "tin look" you can mod podge some of your favorite scrapbook paper on the metal. Find a frame or miter some molding and make your own frame. For lager tin find some cute wrapping paper.

Adding Ribboin and gluing on some quotes or scriptures is another great idea.


We are making some of these frames this month for our craft day. They found these 16 x 20 frames at Michael's ready to paint to your liking. The metal they had to have cut spacifically to size so they found a sheet metal shop that would cut the metal to size. Sometimes if you are doing a couple of boards they can just use scrap and do it for pretty cheap.

If you are in the Mesa area you can contact Casey Jackson at JPF Metal Works near Country Club and Broadway (480-430-3912) for specialty sizes metal for magnet boards and anything else for that matter. He pretty much does "anything metal" at a great price.

More Great Ideas**
Allison went a step further and used the large sheets of galvanized sheet metal to personalize her teen-age daughter's room by making a bullitin board and head board by directly nailing them to the wall.


She also mentions that you can use the cute brads from the scrapbooking isle as some cute magnets. She just cuts off the brad part and glues on the magnet.

3 comments:

kim said...

Love, Love, Love it! I can't wait to make a magnet board!

Mary, Tyson and Family said...

Love the marble magnets! good to know the metal is so inexpensive! Great ideas!!!

Jackamo said...

I love making magnets using the do-it-yourself covered buttons that you can buy at any craft or fabric store. I cover them in cute little swatches of fabric from my stash, pull off the metal loop from the back with some pliers, and glue a magnet on the back. Super quick, cheap, easy, and cute!